Ianadmin

Ianadmin

The proposed new owner of an idled pulp mill in northwestern Ontario says it would restart production of paper-grade pulp by October 2012, and gradually convert the mill to dissolving pulp.terr web_opt
 
It was announced in early July that Aditya Birla Group of India has signed an agreement in-principle to purchase the assets of Terrace Bay Pulp in Terrace Bay, Ont. The international company will establish AV Terrace Bay Inc. (Canada) to complete the purchase. An Aditya Birla subsidiary, Grasim Industries Ltd., proposes to hold a 40% stake in AV Terrace Bay, while the remaining 60% would be held by another subsidiary, Thai Rayon Public Co. Ltd. of Thailand. According to a company press release, Grasim would be contributing $44 million over a period of the next three years, out of the total equity contribution of $110 million.
 
The transaction is subject to court approvals in Canada and other regulatory approvals in Canada, Thailand and India. It is expected to close by July 31, 2012.
 
The new owner will be investing more than $250 million in a phased manner to convert the mill to produce 280,000 tonnes per year of dissolving grade pulp. Until the conversion, which is likely to happen in fiscal 2016, the mill will produce and sell paper grade pulp. Aditya Birla expects the pulp mill to restart by October 2012.
 
The Aditya Birla Group has a significant presence in Canada, including two dissolving pulp mills in New Brunswick, AV Nackawic and AV Cell.

Wednesday, 11 July 2012 13:30

ContiTech Sustainability Portal Augmented

ContiTech is constantly enhancing its ‚Engineering Green Value‘ performance, thus underlining the Corporation’s economical, ecological and social responsibility
 
The ContiTech AG Sustainability Portal is currently being augmented with new content regarding the Corporation´s sustainability performance. A focal point includes the new and extended ‚green stories‘, which concentrate on the development of products that make a contribution to people´s quality of life, as well as environmental and climate protection. These products include Conti® Thermo-Protect with unique properties that form a new kind of insulation, preventing heat loss in industrial equipment even in hard-to-reach places and at the same time protecting employees from overheated rooms. Another example is the scour prevention system CONTI® SCOUR PROTECT, whereby technologically advanced rubber mats effectively prevent washing out of foundations in offshore wind turbines. The portal also devotes attention to the urgent issue of water catchment in dry regions of the world and to optimized cover plates used in conveyor belts, which generate energy savings by 20%. Just two weeks ago, the panel from the Internationale Gesellschaft für Kunststofftechnik (Society of Plastics Engineers) awarded the Sustainability Portal second place for the Automotive Award in the category ‚Media & Publications – Digital Media‘. This was just one of the several awards that ContiTech has received over the past two years praising its sustainability communications.

image 1_web_opt
 
„The augmentation of content was not the only thing we had in mind when enhancing the portal,“ says Anja Graf, Vice President Communications & Marketing. „At the same time, we also implemented other communication methods and forms of illustration for our sustainability approach, specifically for the different target groups.“ There is now also a Chinese version available for one of the Asian core markets. All content is now also accessible in an iPad format. A particular highlight is the Engineering Green Value trailer, which conveys the many areas of application for the Corporation´s sustainable products in a simple manner with attractively illustrated scenes and an emotive short story.

image 2_web_opt
 
„This involves systematically augmenting the illustrations from the image advertising campaign that has been ongoing since June,“ adds Anja Graf. The guiding principle of ‚Engineering Green Value‘ should be firmly anchored in the corporate philosophy and therefore also an integral part of corporate communication in the area of reputation management. The customer magazine ContiTech initiative, the elaborate and appropriately designed sustainability brochure and the company´s trade fair appearances therefore all count toward the overall performance.
Tembec has announced that, due to market related conditions, it will indefinitely idle its high-yield pulp mill located in Chetwynd, British Columbia, as of September 16, 2012.
 
“The high-yield pulp market has continued to soften over the past year. At today’s price levels, it is virtually impossible to maintain viable operations given the current cost structure of the Chetwynd mill,” stated Chris Black, Tembec Executive Vice President and President of the Paper and Paper Pulp Group.  “This is a difficult decision that we have not taken lightly since it has an impact on employees and on the region. We will continue to monitor the market and, in due course, reassess the situation accordingly,” he added.
 
High-yield pulp is used in printing and writing papers, paperboard as well as tissue and towelling. Pulp produced at the Chetwynd mill is shipped to primarily Asia. Tembec is the world’s leading producer of high-yield pulp. A total of 115 employees are currently employed at the Chetwynd mill, which was built in 1990 and has an annual production capacity of 240,000 tonnes. Tembec purchased the mill in 2002.
 
Tembec is a manufacturer of forest products – lumber, pulp, paper and specialty cellulose – and a global leader in sustainable forest management practices. Principal operations are in Canada and France. Tembec has some 4,000 employees and annual sales of approximately $2 billion.  Tembec is listed on the TSX (TMB). Additional information on Tembec is available on its website at www.tembec.com.
The European cleaning industry is experiencing growth. At the same time, the high rate of work-related health problems associated with that growth means improvements in the sector are needed. The SCA brand Tork ® has taken on this challenge, launching Tork Easy Handling ™, a new ergonomic packaging system to help relieve some of the burden of the job.
 
SCA-Tork-Easy-handling
With the aim of contributing to a better working environment for cleaners, Tork conducted an observational study that included more than a hundred cleaners and customers from four countries (Germany, France, the Netherlands and Sweden) in different sectors.
 
The study included observing cleaning workers in their daily work and subsequently interviewing them. This provided Tork with new insights, which have had a strong impact on the industrial designers and engineers who worked on the new packing solution for Tork Easy Handling.
 
“The new packages have been designed with one purpose in mind – to make working life easier for cleaning personnel, improving the ergonomics and efficiency of the tasks they perform,” says Kristian Grennfelt, Packaging Development & Industrial Design Center Manager for Tork.
 
Tork Easy Handling is being launched throughout Europe. The system consists of the plastic container Carry Pack and the cardboard box Carry Box. The system introduces a number of characteristics that are more efficient and ergonomic compared with traditional packages, such as new handles that allow a cleaner to carry a cardboard box in each hand.
 
Tork Easy Handling Carry Box will also be launched in North America this summer.

On Friday 6th July, Palm Paper produced the one millionth tonne of newsprint on Lynn PM7. This is a remarkable achievement and a milestone that has been reached far earlier than was the expectation at the start-up of the machine on the 21st August 2009. To mark the occasion the rolls produced for pressrooms throughout the UK will be labelled with special gold one millionth tonne labels in recognition of this achievement.

One millionth_tonne_of_newsprint

Voith, the paper machine manufacturer of Lynn PM7, measures the respective learning curves of newsprint machines during the first two years of production and Lynn PM7 achieved the very best ever learning curve status in the world of newsprint.

Lynn PM7 has been running very stable at a constant speed of 1,875 metres per minute (equivalent to 75 mph) which is only 25 metres per minute behind the most efficient newsprint machine in the world!

In addition to the standard newsprint grades Palm Paper supplies to all national and most regional publishers, Palm Paper has been developing a new grade which is marketed under the trade name of Palm Top. The product is being supplied to the heatset and gravure printing sectors and is used for the printing of magazines and commercial fliers and brochures.

To accomplish the current level of performance Palm employs a production team that performs at the highest possible level due to the substantial commitment Palm makes in training all employees to be motivated and strive for excellence. Currently Palm has 21 full time or part time apprentices. They will be fully qualified and able to assume paper making roles within the mill by the time the two millionth tonne on Lynn PM7 finds it way to the winders.

Palm Paper is a division within the Papierfabrik Palm Group.

International Paper Company has announced the election of Christopher E. Kubasik to its Board of Directors effective July 10, 2012.

Mr. Kubasik, age 51, is Vice Chairman, President and Chief Operating Officer of Lockheed Martin Corporation, a publicly traded global security and aerospace company. He will become Lockheed Martin's Chief Executive Officer on January 1, 2013.  He previously served as Lockheed Martin's Executive Vice President – Electronic Systems from September 2007 to December 2009, and as Lockheed Martin's Executive Vice President and Chief Financial Officer from February 2001 to August 2007.

"Chris's deep experience as a global business leader and extensive interaction with corporate boards, paired with his experience in business outside North America, lends a valuable perspective to our Board of Directors. We are very pleased to have Chris join the Board of Directors of International Paper," said John Faraci, Chairman and CEO.  

Mr. Kubasik received an executive engineering certificate from Carnegie Mellon University in 2008 and completed the Systems Acquisition Management Course for Flag Officers at the Defense Acquisition University in 2004.  He holds a bachelor's degree in accounting from the University of Maryland.

With the election of Mr. Kubasik and the previously disclosed election of Ilene S. Gordon (effective October 1, 2012), the size of the Board has been increased to 11 members.

To learn more about other members of International Paper's Board of Directors, visit www.internationalpaper.com under the Company and Corporate Governance tab.

SOURCE International Paper

"Despite the negative result and global economic uncertainty, Södra is in a strong financial position," said Gunilla Saltin, Acting CEO of Södra Cell.
Södra's operating profit for the first half of 2012 was SEK -203 million compared with SEK 577 million for the same period the previous year. Profit after net financial items was SEK -215 million. The corresponding figure for the previous year was SEK 573 million.

The first half of the year was characterised by weak economic development in the markets for Södra's products. Production in Södra's business sectors also declined as a result of the market stoppages that were implemented at the beginning of the year. The result was also impacted by one-off items.

The economic crisis in Europe is causing anxiety which is affecting all major markets for Södra's main products. The recession has had an adverse effect on European paper demand, in turn reducing demand for pulp. The consumption of wood products in Europe, meanwhile, has also remained at a very low level, while the interior products market, too, has been hit by the weak performance of the construction and the Swedish home renovation sectors.

"We expect to see our markets gradually growing stronger in the second half of the year. We have also implemented a series of measures to strengthen our earnings potential. As a result, we anticipate that the capacity utilisation at our pulp mills and sawmills will be normal. Despite this, the full-year financial result for 2012 is forecast to be significantly lower than in the last few years," said Saltin.

"Despite the negative result and global economic uncertainty, Södra is in a strong financial position. With an equity ratio of around 60 per cent, we are primed to handle longer and deeper crises than the one we are currently experiencing."

figures1

Pulp
The pulp market recovered slightly in the first half of 2012. The world market price of bleached softwood sulphate pulp rose in the first quarter before dipping again slightly. The strengthening of the Swedish krona against the US dollar weakened the pulp price in Swedish krona. World stocks of hardwood and softwood pulp have decreased.

Production at Södra's five pulp mills during the period was 856,000 tonnes compared with 1,001,000 tonnes in the same period the previous year. This reduction was due to the market stoppages that were implemented at Södra Cell Tofte and Södra Cell Folla at the beginning of the year.

"World stocks are at a good level and we expect to see the chemical pulp market gradually grow stronger in the autumn," said Saltin.

In May, Södra Cell's board of directors authorised two energy investments at Södra Cell Värö, including a new lime sludge reburning kiln and a new pelletizing plant. These profitable investments capitalise on the synergies that already exist between Södra Cell and Södra Timber in Värö.

"Through these investments, we can further enhance the efficiency of the Värö combine while at the same time creating a profitable processing operation for our members' wood raw materials," continued Saltin.

Wood products 
The consumption of wood products in Europe remains at a low level and the market continued its weak performance during the spring. Production in the largest producing countries has been constrained, which means that stocks of wood products are under control. A weak market combined with high raw material costs are weighing down on the profitability of southern Sweden's sawmills.

Södra produced 720,000 cubic metres of sawn wood products during the period, compared with 767,000 cubic metres in the same period the previous year. Södra Timber's profitability was under great pressure in the early part of the year. Production at the new sawmill in Värö has not proceeded according to plan.

"We have reviewed and analysed the profitability of each sawmill and have introduced a series of measures to strengthen our earnings potential. Logistics is another key area and we decided to re-open the distribution centre in Kinda. We expect some of these measures to bear fruit in the autumn but it could take longer for the other changes to take effect," said Saltin.

"The decision to shut down production that was made ahead of the summer has been reversed. We expect capacity utilisation at our sawmills to be normal for the rest of the year," she says.

The process of starting up the new sawmill in Värö continues but is lagging behind schedule. Additional measures are needed, mainly in the refinement area, before production can reach the planned rate. Supplementary investments are being made to ensure the scheduled completion of the sawmill, which is expected to reach full production capacity - i.e. with the sawmill operating on a three-shift basis - in the second quarter of 2013.

"Work on the new sawmill has not been proceeding according to plan. But the work of getting the sawmill completed on schedule is going full steam ahead and it has naturally been given the highest priority."

Interior products 
The economic recession is also affecting the interior products market, causing a decline in volumes and pushing down prices. And while Södra Interiör has defended its market share, the market has shrunk because of the prevailing uncertainties about the economy.

At the beginning of the year Södra Interiör acquired parquet flooring manufacturer Berg & Berg in Kallinge which has some 90 employees. The company produces more than 500,000 m2 of high-quality parquet flooring per year and has net sales of around SEK 130 million. This acquisition will further increase the range of products available to Södra Interiör's customers, while at the same time providing good opportunities for synergies between the companies in areas such as marketing, logistics and product development.

Forestry
Timber volumes handled by Södra Skog fell as a result of the market stoppages at sawmills and pulp mills at the beginning of the year. Volumes were down by around 10 per cent compared with the same period in 2011. To increase the contracting rate, a local market premium was introduced during the spring with good results. With the exception of certain hardwood varieties, the standing stock is at a good level ahead of the autumn.

During the spring, Södra Skog launched a hardwood initiative which embraces the whole chain from forest management training for forest owners to acquisitions of saw timber. Despite the growing volumes from members there is a slight shortage of sawable birch and birch pulpwood.

The spring's seedling sales were excellent. Södra Skog is continuing to invest in both its nurseries to increase seedling volumes to 45 million seedlings per year. A campaign of discounts was introduced in the autumn to stimulate increased autumn planting. Investments in seedling operations are planned this autumn to increase the volume of seedlings with mechanical forms of protection so that the use of chemicals can be phased out.

KapStone Paper and Packaging Corporation (NYSE: KS) ("KapStone" or "the Company") will release its 2012 second quarter earnings on Wednesday, August 1, 2012, after the market closes.
 
The Company will host a conference call on Thursday, August 2, 2012 at 11:00 a.m. ET (10:00 a.m. CT) to review the results for the quarter.  All interested parties are invited to listen and may do so by either accessing a simultaneous broadcast webcast on KapStone's website, http://www.kapstonepaper.com, or for those unable to access the webcast, the following dial-in numbers are available:
 
Domestic:  866.783.2140
International:  857.350.1599
Participant Passcode:  65901802
 
A presentation to be viewed in conjunction with the call will also be available on our website, http://www.kapstonepaper.com, in the "Investors" section. 
 
The webcast is also being distributed through the Thomson StreetEvents Network.  Individual investors can listen to the call at http://earnings.com, Thomson's individual investor portal, powered by StreetEvents.  Institutional investors can access the call via Thomson StreetEvents (https://www.streetevents.com) a password-protected event management site. A replay of the webcast will also be on the Web site beginning at approximately 2:00 p.m. ET the same day. 

SOURCE KapStone Paper and Packaging Corporation
Wood costs for many European pulp mills have fallen the past six months as the pulp market has weakened. In the Nordic countries, pulplog and wood chip prices have fallen 11-15 percent from last spring, according to the Wood Resource Quarterly. Despite the price decline, Europe continues to have some of the highest wood fiber costs in the world.
 
Seattle, USA. Wood fiber costs for pulp mills fell in practically all major markets of Europe in the 1Q/12 because of weaker pulp markets in late 2011 and early 2012. Last year, wood costs in many countries on the continent, including Sweden, Norway, France, Austria, Germany and Spain, reached record highs, but in all those markets, prices for pulplog and wood chips are now substantially lower, according to the Wood Resource Quarterly.
 
The financial instability in many economies in Europe is contributing to the increased uncertainty about the near future demand for pulp and paper on the continent and weakening pulp markets so many pulp mills are trying to cut production costs to stay profitable. Wood fiber costs have fallen more than other cost (energy, labor and
chemicals) the past six months. Nevertheless, the wood costs are still by far the highest cost component when manufacturing pulp, ranging between 55-70% of total production costs for the major producers in Europe, according to Fisher International.
 
Because of the weaker pulp markets, many pulp mills in France and Germany reduced operating rates, resulting in lower demand for pulplogs last winter. This not only interrupted the almost two year trend of price increases, but actually contributed to a fall in prices, back to levels previously seen last summer. With the Euro weakening against the US dollar, wood prices in dollar terms have declined even more dramatically than in the local currency.
 
In Northern Europe, pulplog prices have fallen between 11-15 percent from last spring depending on country and species. It has been difficult to be a forest owner in Sweden the past year, as prices have declined for both sawlogs and pulplogs. In parts of Sweden, it is not likely that pulplog prices will decline much further as they are now reaching the same levels as those for energy logs. 
 
Eucalyptus log prices in Spain have been on a steady decline for almost a year and the major fiber consumers have lowered the price they pay to landowners practically every month so far this year. In US dollar terms, the average cost for Eucalyptus log has declined by 21% since its all-time-high in the 2Q/11, according to the Wood Resource Quarterly.
 
Despite the recent decline in pulpwood and wood chip price, pulp mills in Europe still have higher wood costs than many of their competitors around the world.

The SCA Graphic Laakirchen AG PM 10 was successfully started up on January 23, 2012 after a Metso-supplied press section rebuild in Laakirchen, Austria. The main target of the modernization was to increase production and to decrease energy consumption.

sca laak_opt_web “Our target was to increase sheet dryness after the 3rd press for increased speed. We also wanted to reduce the draw and specific energy consumption and at the same time maintain the high quality level as before the rebuild,” says Andreas Vogel, Production Manager of SCA Graphic Laakirchen PM 10.

Metso’s delivery comprised a rebuild of the press section with a new SymBelt shoe press. In addition, the delivery included mechanical drives for the whole press section and an automation system upgrade for the shoe press. The SymBelt shoe press significantly increases sheet dryness which in turn reduces steam consumption, improves machine runnability, helps reach higher speed and increases production.

The 7.3-m-wide PM 10 produces uncoated wood-containing paper (SC-A) within a basis weight range of 45-60 g/m2 at the design speed of 1,600 m/min. The production capacity of PM 10 is 260,000 tonnes annually.

SCA is a global hygiene and paper company that develops and produces personal care products, tissue, packaging solutions, publication papers and solid-wood products. The company’s sales in 2011 amounted to EUR 11.7 billion and it has approximately 44,000 employees.