Tuesday, 03 February 2015 09:25

emtec at the KRONA Institute in Russia

Written by 
Rate this item
(0 votes)

Optimization of the Production Process of Paper and Board

emtec Electronic GmbH will participate at the IV Annual International State-of-the-Art Conference 2015 at the KRONA Institute in St. Petersburg in Russia with the topic “Modern Systems for Paper and Board Quality Control”. On 18th February, Ms. Elena Beznosova will speak about “Predicting the surface behavior of paper and board during glueing and printing processes” and present some different Paper Testing Technology to optimize the production process of paper and board from the pulp to the finished product with the goal getting an efficient process and the best possible quality with the lowest possible costs.

2015 02 03 092437

For efficient process optimization, it is essential to look at both, the wet and dry end of paper and board production. In the wet end, it is extremely important to have detailed information about the charges of particles in the pulp suspension, which can be determined by the CASCharge Analyzing System. Also important is the knowledge about the surface charge of the pulp fibers, which can be measured with the FPAFiber Potential Analyzer. Furthermore, emtec Electronic developed a new Online measuring device FPOFiber Zeta Potential Analyzer Online, which measures the Zeta Potential of fibers directly during the production process and delivers immediately reliable and necessary information concerning the dosing of chemicals to the pulp.

In addition to the wet-end, it is necessary to get an idea of the quality of the base paper after the production for further steps within the conversion. This can be realized by the EST12Surface & Sizing Tester, which gives reliable and objective information about the surface sizing respectively hydrophoby and the surface pore structure to predict the behavior of paper and board during glueing, printing and coating processes. How this functions will be explained in detail by Ms. Elena Beznosova during her presentation on site.

Contact:
Sandra Vogt    
emtec Electronic GmbH    
Gorkistr. 31    
04347 Leipzig
Germany        
Tel:  +49 (0)341 245709-35
Fax:  +49 (0)341 245709-39
Email: s.vogt@emtec-papertest.de
WEB: http://www.emtec-papertest.com
Read 2366 times